Fix problems with Instant Ink cartridges and enrolled printers, such as print quality and Incompatible Cartridge errors.
Business: Only administrators can make changes in Business accounts.
Follow these steps to fix Incompatible Cartridge and other cartridge errors for printers enrolled in Instant Ink.
Reset the printer to recover from printer errors or failures.
If your printer has a rechargeable battery, remove it.
Press the power button to turn off the printer. If the printer does not turn off, disconnect the power cord from the printer.
Unplug the power cord from the power source.
Wait 60 seconds.
Connect the power cord directly to a wall outlet and to the printer.
Turn on the printer to complete the reset.
HP regularly releases new printer firmware versions with product enhancements or issue fixes.
To see how to update your printer, go to Update the firmware on an HP printer.
An interruption of your printer connection to the Instant Ink service can cause cartridge or connection errors.
Make sure Web Services are on. See HP Printers - Turn On Web Services for more information.
Remove the cartridges and reset your inkjet printer to clear memory.
Remove the cartridges.
With the printer turned on, disconnect the power cord.
Wait 60 seconds.
Reconnect the power cord and turn the printer back on.
Reinstall the cartridges.
Cleaning steps for cartridge errors depend on the type of cartridges your printer uses.
Identify your cartridge type to see how to clean your cartridges.
Instant Ink cartridge types
Follow the steps to fix cartridge errors for type A cartridges.
Make sure the cartridges are correctly seated in the carriage.
Turn the printer on.
Open the door to access to the cartridges.
Make sure the label on the cartridge matches the label on the carriage.
Make sure all the cartridges are firmly in place. If a cartridge is sticking out farther than the others, press it down until it snaps into place.
If the cartridge does not snap down, gently bend the tab away from the cartridge no more than 1.27 cm (0.5 in), and try again.
Close the cartridge access door.
Remove any debris or buildup from the contacts on the cartridges and in the carriage.
Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.
Remove the cartridge indicated in the error message from the carriage.
Wipe the copper-colored contact on the cartridge with a lint-free cloth.
Place the cartridge to the side with the contact facing upwards.
Wipe the contact inside the printhead with a lint-free cloth.
Reinsert the cartridge into its color-coded slot, and then press down on it until it snaps into place.
Repeat these steps for any other cartridges indicated in the error message.
Close the door or lid to the cartridge access area.
Replacement cartridges are part of your subscription.
If you have another Instant Ink cartridge on hand, install it now. Otherwise, contact HP Instant Ink support:
Home / Home Office: HP Instant Ink support
Business: HP Instant Ink for Business support
Follow the steps to fix cartridge errors for type B cartridges.
Remove the cartridge indicated by the error message, and then reinsert the cartridge in its color-coded slot.
Turn the printer on.
Open the door to access to the cartridges.
Wait until the carriage stops moving before you continue.
Push in on the front of the cartridge indicated in the error message, and then remove it.
Push the cartridge back into its color-coded slot until it snaps into place.
Repeat these steps for any other cartridges indicated in the error message.
Close the cartridge access door.
Remove any debris or buildup from the contacts on the cartridges.
Open the door or lid to the cartridge access area. Wait until the carriage stops moving before continuing.
Push in on the cartridge indicated in the error message to release it from the carriage.
Wipe the copper-colored contact on the cartridge with a lint-free cloth. If the copper-colored contact on the cartridge is missing or damaged, the cartridge must be replaced.
Slide the cartridge into its color-coded slot until it clicks into place.
Repeat these steps for any other cartridges indicated in the error message.
Close the door or lid to the cartridge access area.
Replacement cartridges are part of your subscription.
If you have another Instant Ink cartridge on hand, install it now. Otherwise, contact HP Instant Ink support:
Home / Home Office: HP Instant Ink support
Business: HP Instant Ink for Business support
Follow the steps to fix cartridge errors for type C cartridges.
Remove the cartridge indicated by the error message, and then reinsert the cartridge in its color-coded slot.
Turn the printer on.
Open the door to access the cartridges.
Wait until the carriage stops moving before you continue.
Remove the cartridge indicated in the error message from the carriage.
Carriages with cartridge latches: Open the latch, and then pull the cartridge up and out of the slot.
Carriages without cartridge latches: Gently press down on the cartridge to release it, and then pull it out of the slot.
Make sure the protective tape is removed from the contacts.
Do not touch the ink nozzles or the copper-colored electrical strip.
Reinsert the cartridge. The black cartridge goes in the right slot and the tri-color cartridge goes in the left slot.
Repeat these steps for the other cartridge, if necessary.
Close the cartridge access door.
Check for the error message.
Remove any ink or debris from the contacts on the cartridges and in the carriage.
Turn the printer on.
Open the door to access the cartridges, wait for the carriage to stop moving, and then remove the cartridge.
Lightly dampen a lint-free cloth with distilled water, and then wipe the copper-colored contacts on the cartridge.
Lightly dampen a lint-free cloth or swab with distilled water, and then clean the electrical contacts in the carriage.
Wait 10 minutes for the contacts to dry, and then reinsert the cartridge into its color-coded slot.
Repeat these steps for the other cartridge if it was indicated in the error message.
Close the door or lid to the cartridge access area.
If the error persists, clean the cartridge and carriage contacts a second time.
Replacement cartridges are part of your subscription.
If you have another Instant Ink cartridge on hand, install it now. Otherwise, contact HP Instant Ink support:
Home / Home Office: HP Instant Ink support
Business: HP Instant Ink for Business support
Follow these steps to fix cartridge errors for type D (toner) cartridges. There are no cleaning steps for toner cartridges.
Reseating the cartridges can solve some problems.
Remove and then reinstall the toner cartridge. To find instructions for your printer, go to HP Customer Support, type your printer model, and then look for a "Replacing cartridges" or "Reloading toner" document.
Replacement cartridges are part of your subscription.
If you have another Instant Ink cartridge on hand, install it now. Otherwise, contact HP Instant Ink support:
Home / Home Office: HP Instant Ink support
Business: HP Instant Ink for Business support
There are four main reasons why you might be unable to print with HP Instant Ink cartridges.
You canceled.
Instant Ink cartridges only work in enrolled printers. To continue printing, remove the Instant Ink cartridges from your printer and purchase Original HP Ink or Toner directly from the retailer of your choice. Or re-enroll in Instant Ink.
HP All-In Print Plan printing services end immediately if you cancel within 30 days of enrollment, or at the end of your billing cycle if you cancel later. Printers must be returned to HP after cancellation.
The printer was disconnected from the internet. Reconnect your printer to resume printing.
The message Cartridge cannot be used until printer is enrolled in HP Instant Ink displayed. Your printer must be enrolled to use Instant Ink cartridges. See How do I fix cartridge errors associated with printer enrollment? for help.
The message There is a problem with your HP Instant Ink account displayed. Your credit card may be expired. To update your payment information:
Fill in all the fields: card number, CVV, and expiration date. Make sure postal codes are in the correct format.
Instant Ink for Home / Home Office:
Sign into your Instant Ink account.
Click Account in the left menu, then Billing or Shipping & Billing.
Click Manage your payment method under your payment method.
Instant Ink for Business with LaserJet 3000/4000 printers:
Sign into your Instant Ink for Business account.
Open Account in the left menu, then Billing.
Expand the section for your current billing method and click Update Payment.
Select Business and then enter your payment details.
HP All-In Plan for Print
Go to the HP Smart website, click Sign In, and enter your account credentials.
Click Account in the left menu, then Shipping & Billing.
Click Manage your payment method under your payment method.
Printing should be restored within 30 minutes. If not, contact your card issuer.
If your printer cannot connect to HP Instant Ink, it stops printing and displays a message.
Printers enrolled in Instant Ink require an active internet connection for Web Services to function properly. Web Services uses the internet to enable communication between your printer and its web-connected features, such as ink level and page count monitoring.
Disconnecting your printer from the internet for an extended period of time or using a USB-only connection can temporarily limit what the printer can do until the internet connection is restored.
For more information, go to Can't print on an HP+ or Instant Ink enrolled printer.
Follow the steps to fix streaked or faded prints. prints with incorrect colors, or other print quality problems.
Perform the following tasks in the order given. Use the printer after each task to see if the issue is resolved.
Low ink levels can cause print quality issues. If any cartridges are very low or empty, replace them with new Instant Ink cartridges.
Load plain white paper and run the cleaning tool.
Printers with a touchscreen or menus: On the printer, open the Settings or Setup menu, touch Tools or Printer Maintenance, and then touch Clean Printhead or Clean Cartridges.
Printers without a touchscreen or menus: Go to 123.hp.com or your app store to install the HP Smart app. Click the picture of your printer on the home screen to open Printer management options that include the cleaning tool.
If the page that prints has defects, the printhead might be badly clogged. Run up to two more cleaning cycles.
The cleaning page does not count against your pages printed for the month.
If you see blurry edges or jagged lines in your prints, try aligning the printhead.
Printers with a touchscreen or menus: On the printer, open the Settings or Setup menu, touch Tools or Printer Maintenance, and then touch Align Printer.
Printers without a touchscreen or menus: Go to 123.hp.com or your app store to install the HP Smart app. Click the picture of your printer on the home screen to open Printer management options. Select the option to align the printer.
If you did not replace your cartridges before, replace them now with new Instant Ink cartridges.
If you do not have new Instant Ink cartridges on hand, or if replacing cartridges did not help, contact HP Instant Ink support for assistance.
Home / Home Office: HP Instant Ink support
Business: HP Instant Ink for Business support
Resolve the following enrollment errors when using HP Instant Ink cartridges.
Cartridge cannot be used until printer is enrolled
This cartridge can only be used in a printer that is currently enrolled in HP Instant Ink
Instant Ink cartridges can only be used in enrolled printers. Instant Ink-ready cartridges become Instant Ink cartridges as soon as they are used in an enrolled printer.
Is your printer enrolled in HP Instant Ink or HP All-in Plan for Print?
No:
To enroll in Instant Ink, go to HP Instant Ink and click Sign Up Now.
If you do not want to enroll, remove the Instant Ink cartridges and purchase Original HP Ink or Toner directly from the retailer of your choice.
Yes: If your printer is enrolled, continue to the next troubleshooting step.
Sign into your Instant Ink account:
Instant Ink for Home / Home Office: Sign into your Instant Ink account
Instant Ink for Business with LaserJet 3000/4000 series printers: Sign into your Instant Ink for Business account
HP All-in Plan for Print: Go to the HP Smart website, click Sign In, and enter your account credentials.
Click Overview or Printers and check the printer status:
Ready to print : Turn the printer off and back on. If the error message goes away, you can stop troubleshooting.
Not ready to print :
Click the refresh button .
Click the browser reload button to reload the account web page.
Repeat up to five times, until the status changes to Ready to print.
Make sure your connection is compatible with Instant Ink.
Public or guest networks, like those used in colleges, hotels, or coffee shops, are not compatible.
A USB connection to a computer does not work if it is the printer’s only connection. Connect the printer directly to the internet by Wi-Fi or ethernet to use Instant Ink.
Make sure your router is on and connected to the internet.
Use a mobile device or PC on the same network to check the internet connection.
If you cannot connect to the internet through your network, turn the router off and back on.
If the router is not connected to the internet, contact your network service provider.
Check the printer connection to the router.
Wi-Fi connection: The blue wireless light on the printer should be on and not blinking. If it is not, turn the printer and the router off and back on. Go to HP printer setup (Wi-Fi network) for more help.
Ethernet connection: If the light next to the Ethernet port is off, unplug the cable at both ends, and then plug it back in. Turn the printer and router off and back on if the light is still not on.
Make sure Web Services are on. An interruption of your printer connection to the Instant Ink service can cause connection errors. See HP Printers - Turn On Web Services for more information.
Click Overview or Printers and check the printer status again:
Ready to print : Turn the printer off and back on. If the error message goes away, you can stop troubleshooting.
Not ready to print : Click the refresh button and then the browser reload button. Repeat up to five times, until the status changes to Ready to print.
If your printer uses two ink cartridges, try these steps:
Remove the ink cartridges from the printer and set them aside.
Unplug the printer.
Wait 30 seconds.
Plug the printer back in.
Reinstall the ink cartridges.
Check the printer status on your account page again:
Ready to print : Turn the printer off and back on. If the error message goes away, you can stop troubleshooting.
Not ready to print : Click the refresh button and then the browser reload button. Repeat up to five times, until the status changes to Ready to print.
If the error message still appears, turn the printer off and back on.
If the error message still appears, contact HP Instant Ink support for assistance:
Home / Home Office: HP Instant Ink support
Business: HP Instant Ink for Business support
HP All-In Plan for Print: 24/7 Pro live support
If your next shipment shows Shipment Processing or Next estimated shipment in 1 week in the Shipment Tracking or Track Shipments section of your account page for more than 5 days, it means HP was unable to retrieve a tracking number from the carrier.
You should still receive your shipment on time. It might already have been delivered. The message on your account page changes when you install the new cartridge. HP is working to make your tracking information available as soon as possible.
If your Instant Ink bill was not what you expected, there are a few program features to remember.
Your monthly bill is based on the pages you print, not the shipments you receive.
If you cancelled, you are charged at the end of the billing cycle.
You might have been charged for additional pages if you printed more than your plan amount and any rollover pages.
You can view charges and download your invoice for any billing period.
Instant Ink for Home / Home Office:
Sign into your Instant Ink account.
Click HP Instant Ink, then Print and Payment History, then expand the Print and Payment History section.
Select the desired year, and then click Download for a specific billing cycle, or Download All Invoices.
Instant Ink for Business with LaserJet 3000/4000 printers:
Sign into your Instant Ink for Business account.
Click HP Instant Ink, then Print and Payment History, then expand the Print and Payment History section.
Select the desired year, and then click Download for a specific billing cycle, or Download All Invoices.
HP All-In Plan for Print
Go to the HP Smart website, click Sign In, and enter your account credentials.
Click Account in the left menu, then HP All-in plan statements.
To complete the HP Instant Ink account setup, the printer must connect to HP cloud services and register itself to your account.
For help with this error, go to HP printers - Unable to register the printer to your account.
Install the HP software and complete your printer setup.
Go to 123.hp.com, enter your printer model, and follow the instructions to download drivers and set up your printer.